Portable Gas Hot Water Heater 5.5LPM
Product Description
A hot water solution for those planning to fill birth pools for home births. A portable gas hot water heater. Featuring a compact, portable design so that you can have instant hot water to fill your birth pool, without being dependent on limited in-home supplies. A useful solution for those with electric hot water cylinders. Attach the blue hose to a pressurised fresh water supply and regulator hose to a gas tank, and hot water to fill your pool is ready to go.
- Instant hot water, achieves 25 degrees increase at 5.5LPM (or higher at lower flow rates)
- Water flow of up to 5.5 litres per minute
- The internal micro-processor prevents the water temperature from going above +45C, protecting family and pets
- Simple operation with two dials to control temperature and flow rate
- Temperature display panel on the front so you can control to your desired temperature
- Steel housing, white enamel finish
- Automatic ignition – no pilot light (starts when tap is turned on, stops when tap is turned off)
- Easy-connect colour coded hoses
- Adjustable three spray pattern handset for all uses
- Automatic gas cut off after flame failure
- 20 minute cut off safety timer
- Accepts fresh water from any source
- Requires minimum 30psi to 55psi maximum pressure to run effectively. Burnsco offers a range of submersible or non submersible pumps for this task
- Requires 2 x D cell quality alkaline batteries for operation (supplied by the WHBA, but we suggest having extras on hand, just in case)
- Includes 1.5m water inlet hose, 1.2m LPG hose, shower head and 2m hose
- This water heater must be installed outside in a well ventilated area. Users are to install strictly in accordance with the supplied manual and the AS/NZ55601 and NZS5428 gas standards.
- ISO9001 Certified
- Dimensions: 370(l) x 290(w) x 150(d) mm
Please note: The WHBA does not provide gas bottles, and you will need to source this yourself.
THIS PRODUCT MUST BE USED OUTDOORS AT ALL TIMES.
A $50 refundable bond is required to hire this item.
Check availability & hire
$70.00
Step 1.
Step 2.
Pickup at:
Choose whether to pick the pool up at either 37 weeks pregnant or 38 weeks pregnant. This affects your hire end date (maximum of 42 or 43 weeks, respectively). Note: The pool must be returned within 7 days of birth regardless of end date.
Your Hire Start Date is:
Step 3. Use your Hire Start Date in the below calendar to check availability and select your hire period.
Note: depending on your internet connection, the calendar can take several seconds to load. If it has not loaded after 30s, refresh the page and try again.
Want a discount? Become a member!
